..
 
     

 Espaρol


Materials Handling | Universal Products | Accessories |Dealer Links | About Universal  
|
Contact Us | Careers/Job Openings

 
  Universal Accessories

Miscellaneous
Belting
Buckets
 
Miscellaneous Accessories
Valves
Three Way Valves
Two Way Valves
Offset Valves
Adaptors
Flattop Adaptor
Parallel Adaptor
Valve Adaptor
Square to Round Adaptors
Reducers, Flanges  & Sleeves
Flanged Reducer
Loose Flanges
Round Sleeves

Universal Industries Inc.
5800 Nordic Dr.
Cedar Falls, IA 50613
319-277-7501
FAX 319-277-2318

Belt Name Specifications Model (Belt Width)
UNI-PLY 120 Solid woven polyester single ply carcass; 100% PVC imppregnated;120 lbs. PIW working tension; Less than 2% stretch; Oil, acid & moisture resistant; Low temp; Static conductive (<300MgHMS) B3/U (4"); 
C3/U (6.5")
BLUE MAX 200 Solid woven polyester single ply carcass; 100% PVC impregnated with PVGE compound; Low temp (-30°F); Static conductive (<300MgHMS); Low stretch, <1% at working tension of 200 PIW; Oil, acid & moisture resistant. This lighter, more flexible belt can replace UNI-PLY 300 on most 8", 10" & 12" applications. C6/U (8")
D3 (10")
DR24/E/U3 (12")
UNI-PLY 300 Solid woven polyester single ply carcass; 100% PVC impregnated; 300 lbs. PIW working tension; Less than 2% stretch; Oil, acid and moisture resistant.  Meets OSHA static conductive requirements (<300MgHMS) C6/U (8")
D3 (10")
DR24/E/U3 (12")
DD/U6 (21")
F10 (24")
UNI-STOCK R Two ply polyester carcass; 220 lbs. PIW working tension, 3/63" x 3/64"; Oil and resistant covers; static conducting B3/U (4"); 
C3/U (6.5")
UNI-FORM R Three ply polyester carcass; 330 lbs. PIW working tension; 3/63" x 3'64"; Oil and resistant covers; Static conducting C6/U (8")
D3 (10")
DR24/E/U3 (12")
DD/U6 (21")
F10 (24")
HI-TEMP 350 Two ply nylon carcass; 220 lbs. PIW working tension; 3/16" x 1/16"; high temperature covers-350° maximum;Oil resistant C6/U (8")
D3 (10")
DR24/E/U3 (12")
DD/U6 (21")
F10 (24")
HI-TEMP 400 Two ply nylon carcass; 220 lbs. PIW working tension; 3/16" x 1/16"; high temperature covers-400° maximum;   C6/U (8")
D3 (10")
DR24/E/U3 (12")
DD/U6 (21")
F10 (24")
WHITE PVK Solid woven polyester single ply carcass, PVC impregnated; 120 PIW or 200/250 PIW B3/U (4"); 
C3/U (6.5")
UNI-LON 100 Two ply rubber modified vinyl; 100 lbs. PIW working tension; Cover resists oil, grease and animal fat C6/U (8")
D3 (10")
DR24/E/U3 (12")
DD/U6 (21")
F10 (24")
UNI-LON8 150 Two ply rubber carcass, 150 lbs. PIW working tension; Grade 2; SBR Covers Dual Roll
(18', 24", 30" 36")
UNI-TUF 225 2 Ply rubber carcass; 220 PIW working tension; Grade 2; SBR Covers Dual Roll
(24", 30", 36")
PVC 120 One ply PVC carcass; 120 PIW working tension; Friction surface resists oil, grease and chemicals MPC/MPK
(12", 16", 24")
Tri-Roll 220 2 ply rubber carcass; 220 PIW working tension; heavy duty belt; Moderate oil resistance Tri-Roll (30")
Tube Conveyor Two ply continuous chevron belt with super slider back Tube Conveyor (15")

*Because we constantly strive to provide the finest material handling equipment, establishing industry standards, specifications must remain subject to change without notice.*

Buckets
Universal Industries, Inc. now offers nylon and urethane buckets in addition to our standard High Density Polyethylene (HDPE) and steel buckets. The nylon buckets are much more resilient with a higher temperature rating, up to 350 degrees, than the HDPE, and are 2-3 times more abrasive resistant. Our urethane buckets are ideal for handling sticky materials because the surface release to the material is much better. Urethane buckets are 3 to 4 times more abrasive resistant than nylon, 4-6 times more than HDPE.

Model Bucket
Size/Type
Number
Holes
A B C* D W P H CU. IN.
B3 4"X3" PLASTIC
4"X3" STEEL (18GA, 14GA)
2
2
15/16"
15/16"
1 7/8"
1 7/8"
- 1 1/16"
1 1/16"
3 3/4"
3 3/4"
3"
3"
3"
3"
10.5
12.2
C3/U1 6"X4" PLASTIC
6"X4" STEEL (18GA, 14GA)
2
2
1 5/8"
1 3/4"
2 3/4"
2 3/4"
- 1 7/16"
1 7/16"
6"
6 1/5"
4"
3 7/8"
4"
3 15/16"
32.0
33.5
C6/U2 7”X4.5” PLASTIC
7”X4.5” STEEL(16GA, 11GA)
3
3
1 1/4"
1 1/8"
2 1/2"
2 1/2"
- 1 7/8"
1 7/8"
7 1/2"
7 1/4"
4 1/2"
4 5/8"
4 1/2"
4 11/16"
47.3
64.0
D3/DD
DR18/U6
9”X5.5” PLASTIC 
 9”X5.5” STEEL (16GA, 11GA) 
9”X5” HDPE LP (DR18 ONLY)
4
4
4
1 1/4"
1 1/4"
1"
1 3/4"
1 3/4"
1 3/4"
3 1/2"
3 1/2"
3 1/2"
2 1/4"
2 1/4"
2 1/4"
9 1/2"
9 1/2"
9 1/8"
5 1/2"
5 1/2"
5 1/4"
5 1/8"
5 3/4"
3 3/4"
106.8
103.7
103.7
DR20/G50
DR30/G100
12”X8” HDPE
12”X8” HDPE STYLE SS
4
4
1 5/32"
1 1/8"
3 3/8"
3 3/8"
3 3/8"
3 3/8"
- 12 7/16"
12 3/8"
8 3/4"
8 3/8"
8 1/4"
8 1/4"
360.2
272.5
DR20/G50 14”X8” CC-HD WHT 5 1 7/32" 3" - - 14 7/16" 8 3/4" 8 13/16" 429.6
DD/U6 20”X5.5” PLASTIC 
18”X5.5” 14GA CS
7
7
1 3/4"
7/8"
3 1/4"
1 3/4"
1 3/4"
3 1/4"
2"
2 1/4"
20"
18 1/8"
5 1/2"
5 5/8"
5 1/8"
5 1/2"
219.6
196.7
E/U3
DR24
11”X6” PLASTIC 
11”X5.5” STEEL (16GA, 11GA)
11"X6” HDPE LP DR24 ONLY
5
5
5
1 1/4"
1 1/4"
1 1/4"
1 3/4"
1 3/4"
1 3/4"
2 3/4"
2 3/4"
2 3/4"
2 1/4"
2 1/4"
2 1/4"
11 1/2"
11 1/2"
11 1/8"
6 1/2"
5 1/2"
6 3/8"
5 1/8"
5 3/4"
4 1/2"
219.6
134.2
147.7
F10 11”X7” HDPE 
11”X7” 14 GA CS 
22”X7” CS NO BRACE 
22”X7” CS W/ BRACE
4
4
6
6
15/16"
15/16"
1"
1"
3 1/8"
3 1/8"
4"
4"
3 1/8"
3 1/8"
4"
4"
2"
2"
2"
2"
11 1/4"
11"
22"
22"
7 3/8"
7 1/4"
7 1/4"
7"
7 1/4"
6 1/4"
7"
7"
231.8
231.8
456.5
451.5

All plastic buckets are available in HDPE, Nylon or Urethane unless specifically stated otherwise.
*Occurs once on the 9"x5 1/2" bucket; twice on the 11"x5 1/2" bucket; four times on the 18"x5 1/2" bucket.
NOTE:  All buckets have 9/32" dia. holes except the F-10 Buckets which have 11/32" dia. holes.

 
 

Home | Materials Handling | Universal Products | Dealer Links
  About Universal | Contact Us

 

Universal Industries Inc. .. 5800 Nordic Dr. .. Cedar Falls, IA 50613 .. 1.800.553.4446