Top Take-Up U Series Bucket Elevators
Our Top Take-up U Series elevators are constructed with the take-up system in the head casing rather than the boot. This design allows for a curved bottom boot to reduce product build up and offers a better seal for fine and dusty materials.
Fine materials, such as sugar, salt, or flour, are known for being difficult to handle due to the dust and the ability to wear out bearings in the take-up area. That is why Universal Industries, Inc.® engineered the Top Take-up Series.
The Top Take-up U Series is offered in three different sizes that each have a range of capacities in order to hit your speed, and footprint requirements. Available in powder coated carbon, stainless, or galvanized steel with buckets available in HDPE, carbon steel, nylon and urethane.
Each Take-up U Series model offers an EASY DUMP® capacity rating that utilizes gravity discharge techniques to reduce product damage.
(EASY DUMP® speed, the speed suggested for gentle handling, is only guaranteed on the lowest capacity for each elevator).
|Model||Capacity||Cubic Ft./hr||Cubic Meters/hr||Buckets||Belting|
|U1TT-220ED||175 BPH||220 ft3/hr||6 m3/hr||6” x 4” (152 mm x 102 mm)||6-1/2” (165 mm)|
|U1TT-630||500 BPH||630 ft3/hr||17 m3/hr||6” x 4” (152 mm x 102 mm)||6-1/2” (165 mm)|
|U2TT-800ED||600 BPH||750 ft3/hr||21 m3/hr||7” x 4-1/2” (178 mm x 114 mm)||8” (203 mm)|
|U2TT-1500||1,200 BPH||1,500 ft3/hr||42 m3/hr||7” x 4-1/2” (178 mm x 114 mm)||8” (203 mm)|
|U2TT-2000||1,600 BPH||2,000 ft3/hr||56 m3/hr||7” x 4-1/2” (178 mm x 114 mm)||8” (203 mm)|
|U3TT-1800ED||1,459 BPH||1,815 ft3/hr||51 m3/hr||11” x 5-1/2” (279 mm x 140 mm)||12” (305 mm)|
|U3TT-2250||1,820 BPH||2,250 ft3/hr||63 m3/hr||11” x 5-1/2” (279 mm x 140 mm)||12” (305 mm)|
|U3TT-3000||2,400 BPH||3,000 ft3/hr||84 m3/hr||11” x 5-1/2” (279 mm x 140 mm)||12” (305 mm)|
ED = Easy Dump®
The EASY DUMP® capacity rating causes significantly less product damage than elevators that run at a centrifugal discharge speed.