Twin Trunk Alpha Series Bucket Elevators and Seed & Grain Legs

Alpha Series elevators are perfect for gently handling bulk products. Each elevator can reach a range of different capacities and speeds, and are available in powder coated carbon, stainless, or galvanized steel.

Each Alpha Series model offers an EASY DUMP^® capacity rating that utilizes gravity discharge techniques to reduce product damage than elevators that run at a centrifugal discharge speed. After product is transferred into the elevator, the buckets travel up at a low rate of speed and then slowly tilt over the head pulley to allow the product to gently cascade down into the discharge housing. This continuous cycle provides a smooth flow of material with minimal damage.

Buckets are available in HDPE, carbon steel, nylon and urethane. Optional double row or single row buckets available on certain models.

(EASY DUMP^® speed, the speed suggested for gentle handling, is only guaranteed on the lowest capacity for each elevator).

Boot cleanout options are available for models B3-F10. View Options »

Model	Capacity	Cubic Ft./hr	Cubic Meters/hr	Buckets	Belting
B3	75 BPH (ED) - 300 BPH	94 ft3/hr - 375 ft3/hr	2.7 m3/hr - 10 m3/hr	3-3/4” x 3” (95 mm x 76 mm)	4” (102 mm)
C3	175 BPH (ED) - 700 BPH	220 ft3/hr - 875 ft3/hr	6 m3/hr - 24 m3/hr	6” x 4” (152 mm x 102 mm)	6-1/2” (165 mm)
C6	600 BPH (ED) - 1,600 BPH	750 ft3/hr - 2,000 ft3/hr	21 m3/hr - 56 m3/hr	7” x 4-1/2” (178 mm x 114 mm)	8” (203 mm)
D3	1,000 BPH (ED) - 3,000 BPH	1,250 ft3/hr - 3,700 ft3/hr	35 m3/hr - 105 m3/hr	9” x 5-1/2” (229 mm x 140 mm)	10” (254 mm)
DD	2,000 BPH (ED) - 6,000 BPH	2,500 ft3/hr - 7,500 ft3/hr	71 m3/hr - 212 m3/hr	9” x 5-1/2” (229 mm x 140 mm)	21” (533 mm)
E	1,300 BPH (ED) - 4,500 BPH	1,625 ft3/hr - 5,625 ft3/hr	46 m3/hr - 159 m3/hr	11” x 5-1/2” (279 mm x 140 mm)	12” (305 mm)
F10	5,000 BPH (ED) - 10,000 BPH	6,250 ft3/hr - 12,500 ft3/hr	177 m3/hr - 354 m3/hr	11” x 7” (279 mm x 178 mm)	24” (610 mm)
M	10,000 BPH (ED) - 25,000 BPH	12,445 ft3/hr - 30,000 ft3/hr	353 m3/hr - 850 m3/hr	18” x 8” (457 mm x 203 mm)	38” (965 mm)